[SN EM302008] USED Gibson Memphis / ES-339 Ebony [11]

The ES-339 is a small semi-acoustic made at Gibson’s Memphis factory.
The body is made of laminated maple, and by placing a center block inside, the ES-339 has the same construction as the ES-335, a typical semi-acoustic model with an airy yet rich sustain, and the scale is the same as the ES-335, but the body is one size smaller.
The pickups are 57 Classics, which are well known as low-gain pickups, and they enhance the warm sound.

There is a thin clip tuner mark on the head.
There is a slightly noticeable scratch on the left side near the F hole.
There are some scratches, dents, and metal tarnish.
The neck is slightly twisted, but is in good playing condition.

Serial number: EM302008
Year of manufacture: 2013
Country of manufacture: USA
Case: Original hard case
Weight: 3.30kg
Truss Rod: No problem (with a slight torsion)
Fret Height: No problem, fret height is sufficient.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 22.9mm
SCALE: 624mm (24.56″)
RADIUS: 254mm (10″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

specs

Serial No.
EM302008

Year of manufacture
2013

Country of manufacture
United States of America

Case
Genuine hard case

Weight
3.30kg

Truss Rod
No problem (slight torsion)

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
22.9mm

Scale
624mm (24.56″)

RADIUS
254mm (10″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment