[SN CTI B32159] USED Paul Reed Smith (PRS) / SE Custom 24 Burled Ash Vintage Sunburst [20]

The SE Custom 24 Burled Ash adds a unique new look while maintaining the high playability, reliability, and clarity of tone.
The SE Custom 24 Burled Ash features burled ash on the top of the body, mahogany back, wide-sin maple neck, 24 frets, 25″ scale, patented molded PRS tremolo, 2 x 85/15 “”S”” pickups, 3-way blade switch, and coil tapping with push/pull tone control. The basic specs are still the same, including coil tapping with push/pull tone control.

* The guitar has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted since we received it, so it is in good playing condition.

It is in good condition with only minor scratches and small dings.

Item rank : B+ (Good)

Year of manufacture : 2019
Truss Rod : There is plenty of room
Fret : 60-70%.
Accessories : Soft case / Genuine arm
Country of Origin Indonesia
Weight 3.52kg
Serial CTI B32159

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|22.5mm
SCALE|635mm (25″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
22.5mm

Scale
635mm (25″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment